Comboinstruments C120 TDS meter

  • Comboinstruments C120 TDS meter
Product code: 5902270766981
Add to wish list Compare
25,95 EUR
/ szt.

Easy product returns

Buy a product and check it in your own time, at home.
You can return the product without providing a reason within 14 days.
Show details
14 days for a return
Your satisfaction is very important to us, therefore you can make a return without providing a reason within 14 days.
No stress and worry
Thanks to the integration with cheap returns you can purchase without stress and be sure that the return process will be hassle free.
Easy returns wizard
All returns processed by our shop are managed in a easy-to-use returns wizard which gives you the ability to send a return parcel.
  • Measure Range: 0~19.99ppt
  • Resolution: 0.01ppt
  • Accuracy : ±2%F.S
  • Operating Temperature: 0°C~50°C
  • Calibration: Manual, at 1 point through trimmer
  • Batteries: 4x 1.5V (AG-13 Button Battery)
  • Dimensions: 150mm x 30mm x 20mm
  • Weight: 60g

Comboinstruments TDS Meter C120 is beneficial for users of reverse osmosis water filtration systems (TDS measurement of water after filtration)

Comboinstruments devices are perfect for users looking for a budget solution without sacrificing quality.

Operating Information
1. Remove the protective cap.
2. First clean the electrode with distilled water, and suck it with filter paper.
3. Turn on pH by „ON-OFF” switch localed on the top of battery case.
4. Immerse the electrode in solution up to the immersion level.
Under no circumstances immerse above display level.
5. Stir gently and wait for the reading to stabilize.
6. After use, Switch off it, Use the distilled water clean the electrode and replace the protective cap.

Calibration
1. Immerse the meter in the destilled water. Activate it after a few hours.
2. Immerse the meter in 12.88ppt calibration solution (at 25°C). And stir it gently.
3. Allow the reading to stabilize and with a small screwdrive turn the calibration trimmer until the display shows ''12.88''.
4. Rinse the electrode with distilled water and suck it with tissue paper.
5. Replace the protective cap.
6. Calibration is now complete

Users reviews
Ask for this product:

If this description is not sufficient, please send us a question to this product. We will reply as soon as possible.

Your e-mail:
This field is required for placing an order.
Question:
This field is required for placing an order.
fields marked with - This field is required for placing an order. - are required

We care about your privacy

This page uses cookie files to provide its services in accordance to Cookies Usage Policy. You can determine conditions of storing or access to cookie files in your web browser.

Close
pixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixel