CO2 Emergency Stop Station (DSE-1)

The DSE-1 CO2 Emergency Stop Station provides a simple method to shut off the CO2 supply when any fault or high CO2 level is detected. It is a 120V controlled outlet that supplies the power to CO2 solenoid valves in normal  operation . The Carbon-X will then automatically shut off DSE-1 power if any fault or high CO2 level is detected within any of the installed CO2 sensors. If the DSE-1 loses communication with the Carbon-X, the power supply will also be disabled.

<sub>LED status:
* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.
* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.
* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.
* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.</sub>

Package Content:

1 x Emergency Stop Device Station

 1 x 16ft RJ12 Cable

 1 x  4ft RJ12 Cable

 1 x  RJ12 T-Splitter

Specification:

Input Voltage:                              100~240 VAC, 50/60Hz

Output Current:                            10A

Output Voltage:                           100~240 VAC, 50/60Hz

Working Environments:                Temperature 32-122°F, Humidity<=90%

Package Dimensions:                   85mm(L) x 80mm(W) x 90mm(H)

G.W. per pack:                            0.34kgs