Comboinstruments C120 TDS meter

  • Comboinstruments C120 TDS meter
300,00 SEK
/ szt.

Enkel produkt returnerar

Köp en produkt och kontrollera den i din egen tid, hemma.
Du kan returnera produkten utan att ge en orsak inom 14 dagar.
Visa detaljer
14 dagar för en retur
Din tillfredsställelse är väldigt viktig för oss, därför kan du göra en avkastning utan att ge en anledning till det 14 dagar.
No stress and worry
Tack vare integrationen med billiga avkastningar kan du köpa utan stress och vara säker på att returprocessen blir problemfri.
Enkelt returnerar guiden
Alla avkastningar som behandlas av vår butik hanteras i en användarvänlig returguide som ger dig möjlighet att skicka ett returpaket.
  • Measure Range: 0~19.99ppt
  • Resolution: 0.01ppt
  • Accuracy : ±2%F.S
  • Operating Temperature: 0°C~50°C
  • Calibration: Manual, at 1 point through trimmer
  • Batteries: 4x 1.5V (AG-13 Button Battery)
  • Dimensions: 150mm x 30mm x 20mm
  • Weight: 60g

Comboinstruments TDS Meter C120 is beneficial for users of reverse osmosis water filtration systems (TDS measurement of water after filtration)

Comboinstruments devices are perfect for users looking for a budget solution without sacrificing quality.

Operating Information
1. Remove the protective cap.
2. First clean the electrode with distilled water, and suck it with filter paper.
3. Turn on pH by „ON-OFF” switch localed on the top of battery case.
4. Immerse the electrode in solution up to the immersion level.
Under no circumstances immerse above display level.
5. Stir gently and wait for the reading to stabilize.
6. After use, Switch off it, Use the distilled water clean the electrode and replace the protective cap.

Calibration
1. Immerse the meter in the destilled water. Activate it after a few hours.
2. Immerse the meter in 12.88ppt calibration solution (at 25°C). And stir it gently.
3. Allow the reading to stabilize and with a small screwdrive turn the calibration trimmer until the display shows ''12.88''.
4. Rinse the electrode with distilled water and suck it with tissue paper.
5. Replace the protective cap.
6. Calibration is now complete

Användarnas recensioner
Be om denna produkt:

Om denna beskrivning inte är tillräcklig, skicka oss en fråga till den här produkten. Vi kommer att svara så snart som möjligt.

Din email:
Det här fältet krävs för att beställa.
Fråga:
Det här fältet krävs för att beställa.
fält markerade med - Det här fältet krävs för att beställa. - krävs
### We care about your privacy This page uses cookie files to provide its services in accordance to [Cookies Usage Policy](https://maxgrowshop.com/eng-privacy-and-cookie-notice.html). You can determine conditions of storing or access to cookie files in your web browser.
Close
pixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixel