Aqua Master Tools P110 Pro - Replacement Electrode for Combo pH & EC and Temp Meter
Replacement electrode for Aqua Master Tools P110 Pro temperature & pH meter
Product code: 6027
Leave feedback on the product
Aqua Master Tools P110 Pro - Replacement Electrode for Combo pH & EC and Temp Meter
temporarily unavailable
Shipping
from
€2.35
-
DPD Pick-Up Point
(Poland)
from
€2.35
-
DPD Pick-Up Point
(Poland)
DPD Pick-Up Point
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
€36.89
Price
€36.89
The lowest price during 30 days prior to the reduction:
€35.05
The promotion runs until %s
€45.38
Price
€45.38
The lowest price during 30 days prior to the reduction:
€43.11
The promotion runs until %s
Unavailable
Gwarancja bezpiecznego zakupu
Opis produktu
Opis produktu
Aqua Master Tools - Replacement pH Electrode for the P110 Pro Combo Meter P110 Pro pH, EC, and Temperature Electrode This replacement pH, EC, and temperature electrode is suitable for the P110 Pro combo meter. The electrode has an IP67 waterproof rating when attached to the meter. Instructions for replacing the electrode can be found in our user manual: Correctly unscrew the sealing ring at the bottom of the meter. Remove the damaged/old electrode by gently pulling it out. Carefully insert the new recessed electrode into the correct position so that the connectors connect properly and do not damage the meter or electrode. Check that the rubber seal is properly seated. Tighten the meter's sealing ring securely. Calibrate the meter according to the instructions included with the meter. The meter is now ready for use!
Opinie
Opinie
Number of ratings: 0
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
