Aqua Master Tools P50 Pro - Replacement Electrode for pH & Temp Meter
Replacement electrode for the P50 Pro temperature & pH meter
Product code: 6023
Leave feedback on the product
Aqua Master Tools P50 Pro - Replacement Electrode for pH & Temp Meter
temporarily unavailable
Shipping
from
€2.35
-
DPD Pick-Up Point
(Poland)
from
€2.35
-
DPD Pick-Up Point
(Poland)
DPD Pick-Up Point
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
€24.60
Price
€24.60
The lowest price during 30 days prior to the reduction:
€23.37
The promotion runs until %s
€30.26
Price
€30.26
The lowest price during 30 days prior to the reduction:
€28.74
The promotion runs until %s
Unavailable
Gwarancja bezpiecznego zakupu
Opis produktu
Opis produktu
Aqua Master Tools P50 Pro pH Temp Electrode This replacement electrode is suitable for the P50 Pro pH Temp Meter. The electrode is waterproof to IP67 when attached to the meter. Please refer to the instruction manual in our user manual for instructions on how to replace the electrode or watch the video tutorial. Electrode replacement procedure: Begin by unscrewing the sealing ring located on the bottom of the meter. Gently remove the old or damaged electrode by carefully pulling it out. Carefully insert the new electrode, ensuring the connectors are properly aligned to prevent damage to the meter or electrode. Ensure it is fully seated. Check that the rubber seal is properly seated. Tighten the sealing ring securely. Follow the calibration instructions in this manual to accurately calibrate the meter. Your meter is now ready for use with the new electrode, which has been correctly installed.
Opinie
Opinie
Number of ratings: 0
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
