Autopot Tray2Grow Watering System 111x41cm - One Tray, 5 Different Uses
The Autopot Tray2Grow is a fully automated system that offers several growing options: microgreens, seeding trays, or traditional pots. This versatile self-watering system, with an Aquavalve regulating flush, requires no electricity and saves water.
Product code: 5847
Leave feedback on the product
Autopot Tray2Grow Watering System 111x41cm - One Tray, 5 Different Uses
temporarily unavailable
Shipping
from
€2.83
-
Orlen package
(Poland)
from
€2.83
-
Orlen package
(Poland)
Orlen package
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
€111.17
Price
€111.17
The lowest price during 30 days prior to the reduction:
€105.61
The promotion runs until %s
€111.17
Price
€111.17
The lowest price during 30 days prior to the reduction:
€105.61
The promotion runs until %s
Unavailable
Gwarancja bezpiecznego zakupu
Opis produktu
Opis produktu
Autopot Tray2Grow watering system - one tray, many uses Dimensions: 111.5cm (L) x 41cm (W) x 95cm (Depth) The Tray2Grow system includes: 1x Tray2Grow tray and lid 1x AQUAvalve flush 52x 9mm grommet 1m 9mm pipe 16-9mm Click-Fit connector 1x 9mm filter 1x 6mm overflow grommet 3x spirit level 10x capillary spikes 1x capillary mat 1x root control mat 4x seed trays (as in the main picture) 1x snail repellent copper tape Discover the new thing from Autopot! Tray2Grow is a fully automated, completely power-free system that offers five ways to water your plants. The Tray2grow accommodates seed trays, small pots, grow bags (or fabric pots), microgreens trays, and classic planters, making it the most versatile product in the AutoPot range and one of the most versatile watering systems available. Equipped for every eventuality, the Tray2Grow includes optional capillary spikes that can be installed inside the tray. These spikes pierce the bottom of the grow bag (or fabric pot), allowing the substrate inside to be watered. By removing the spikes and installing the capillary spikes, the Tray2Grow can accommodate up to four standard seed trays (included), two microgreens trays, any number of perforated or organic pots, or the specially designed Autopot 107.5 L / 23.5 gal grow bag. The highly versatile Autopot Tray2Grow self-watering system is perfect for growing herbs, flowers, or vegetables outdoors on a balcony. It can also be used for indoor growing. On each side of the tray are three holes for garden stakes (e.g., bamboo poles). Using Tray2Grow – germinating seeds and microgreens in small plastic pots – is possible in traditional fabric pots or in the rectangular fabric container that comes with the grow bags. After removing the spikes and installing the drip mats, the Tray2Grow system can accommodate up to four standard seed trays (included), two microgreen trays, any number of perforated-bottom pots, or fabric pots. You can also use the large-capacity fabric planter with a frame and a capacity of 107.5 liters (32.5 gallons), which is included with the product. On each side of the container are three holes for garden stakes if you're tying your plants down. The tray is equipped with three built-in spirit levels to help ensure everything is 100% level. Combined with the wide range of Autopot Tray2Grow replacement parts, you can choose from a set of trays with capillary tips for use with grow bags or a set of capillary mats for pots, seed trays, or planters. How to assemble the Autopot Tray2Grow system: - Always ensure the surface on which you place the tray is flat and firm. Do not place the system on surfaces such as gravel or sand. - If using a grow bag, loosen the soil before placing it in the tray to loosen the substrate. - The perforated base improves aeration and drainage. - If growing outdoors, remove the overflow plug to drain excess water that may collect during rain. If heavy rain occurs, disconnect the reservoir until the rain stops and the water is used up. When growing indoors, leave the overflow plug in place. If using Tray2Grow with pots or trays, always pre-soak the capillary mat and root control material. How to use the Autopot Tray2Grow system: - Once the bag, pot, or tray is in place and planted, water it with a watering can. Allow the plants to absorb this water before turning on the system. Because grow bags usually contain some substrate nutrient, it's often best to supply clean water for a few weeks and then gradually introduce liquid fertilizers through the reservoir and tubing. Water sparingly in the early stages. Consider turning the Tray2Grow system on and off periodically to help the plants establish themselves. If using pots or seed trays, always ensure they have holes in the bottom to allow the growing medium to contact the root control mat and the mat underneath. This is essential for water and/or nutrient uptake. Learn more about the Tray2grow system in this video.
Opinie
Opinie
Number of ratings: 0
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
