Tropf-Blumat dripper with 3mm tube, 2 pieces
Ceramic dripper with humidity sensor
Product code: 3883
Leave feedback on the product
Tropf-Blumat dripper with 3mm tube, 2 pieces
running out
Shipping
from
€2.35
-
DPD Pick-Up Point
(Poland)
from
€2.35
-
DPD Pick-Up Point
(Poland)
DPD Pick-Up Point
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
€10.48
Price
€10.48
The lowest price during 30 days prior to the reduction:
€9.94
The promotion runs until %s
€12.89
Price
€12.89
The lowest price during 30 days prior to the reduction:
€12.23
The promotion runs until %s
Gwarancja bezpiecznego zakupu
Opis produktu
Opis produktu
Tropf-Blumat Drip Head with 3mm Tubing, 2-Pack Blister Pack. Set of two Tropf-Blumat ceramic drip heads with a humidity sensor in blister packaging. The Tropf-Blumat ceramic drip head with a humidity sensor is the core component of the Blumat automatic irrigation system. It functions as both a humidity sensor and a water distributor. It consists of a clay cone, a control head with a membrane, and a valve. It is equipped with a T-connector (8-3-8mm) and a 20 cm long silicone tube with a diameter of 3 mm. The Tropf-Blumat drip head monitors the soil moisture level at the point of installation (near the plant's roots) and reacts immediately by providing the correct amount of water if the soil around the roots becomes too dry. A single drip head irrigates and monitors soil with a diameter of 20-25 cm. It operates based on the principle of osmosis. Connect to the water source, which can be a gravity tank or faucet, with an 8 mm inlet hose. Connect to the faucet via a water pressure reducer. The following components are necessary for connection to the water source if the dripper is not purchased as an extension of one of the pre-made kits, which already include the following: An 8 mm inlet hose, black or white, sold by the meter or in rolls (the product can be found in the HOSES section), which is needed to connect the dripper to the water source. If the installation will be against a white wall and you don't want it to be visible, we recommend a white hose; a gravity tank connector (product in the accessories section) allows you to connect the 8 mm tube to the tank; a terminal connector to close the 8 mm inlet tube; and a pressure reducer (the product can be found in the OTHER ACCESSORIES section), which is needed if the system is to be connected to a faucet.
Opinie
Opinie
Number of ratings: 0
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
