Wassertech Water Timer - irrigation programmer / controller / regulator
High-quality electronic irrigation controller from Wassertech.
Product code: 1396
Leave feedback on the product
Wassertech Water Timer - irrigation programmer / controller / regulator
large amount
Shipping
from
€2.36
-
DPD Pick-Up Point
(Poland)
from
€2.36
-
DPD Pick-Up Point
(Poland)
DPD Pick-Up Point
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
€23.32
Price
€23.32
without VAT
The lowest price during 30 days prior to the reduction:
€22.15
The promotion runs until %s
€23.32
Price
€23.32
without VAT
The lowest price during 30 days prior to the reduction:
€22.15
The promotion runs until %s
Gwarancja bezpiecznego zakupu
Opis produktu
Opis produktu
Wassertech Water Timer Irrigation Programmer A modern, easy-to-use timer for automatic watering of plants in soil and hydroponic systems. Ideal for use in gardens, greenhouses, polytunnels, and growbox systems. Product features: New analog irrigation controller from Wassertech Designed for crops in soil and hydroponic systems Single watering duration: from 1 minute to 120 minutes Watering frequency: from 1 hour to 168 hours (i.e. once a week) Powered by two AAA batteries (not included) Operating temperature range: from 5°C to 60°C Fits most 25 mm (1 inch) connectors and garden hoses Working pressure range: from 0.5 to 8 bar Very easy installation without tools How does it work? The timer has two dials: RUN TIME (minutes) – specifies how long a single watering session should last. FREQUENCY (hours) – specifies how often the timer should activate. Once set, the timer automatically activates the valve at the preset intervals, ensuring regular watering without the need for manual operation. Installation instructions: Unscrew the waterproof cover and install two AAA batteries. Test the timer by turning the RUN TIME dial from the "OFF" position. You should hear the motor running within 30 seconds. If the timer does not operate, make sure the batteries are securely installed. Mount the timer on the faucet: Loosen the large green ring. Tighten the black ring to the faucet thread. Then tighten the green ring. Notes: The timer starts counting down from the moment you set it. You must set it at the time you want watering to begin. You can change the dial settings at any time. To stop the timer, turn the FREQUENCY dial to the RESET position. Troubleshooting: If the water does not turn on: Make sure the tap is turned on. Check the batteries. Make sure the FREQUENCY and RUN TIME settings match. FREQUENCY must be greater than RUN TIME – for example, you cannot set 1 hour for frequency and 60 minutes for watering.
Opinie
Opinie
Number of ratings: 0
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
